EME in-line piston filling machines
Machines for filling thin, thick and pasty products
Description
In-line piston filling machines are especially suitable for filling thin, thick and pasty products. They can be used for partial or full filling (cold or hot filling) in cans, jars, bottles, buckets and canisters. Also suitable for filling menu trays or thermoforming trays.
Function
In-line piston filling machines work in cycle operation and can be equipped with up to 12 filling stations, depending on the output range. The machine can be connected to an existing transport system and synchronized.
The use of interchangeable format parts makes it possible to switch to a different can, jar or bottle size at short notice. The dosing range can be further increased by using interchangeable cylinders.
Examples of in-line piston
filling machines
Available types of in-line piston
filling machines
| Type | Capacity in fillings / min |
|---|---|
| KT 1-S | up to 25 |
| KT 2-S | up to 50 |
| KT 4-S | up to 80 |
| KT 6-S | up to 100 |
| KT 8-S | up to 120 |
| KT 10-S | up to 135 |
| KT 12-S | up to 145 |
Technical data
Performance:
(depending on filling quantity and product):
5 – approx. 80 fillings/min
Container size:
when using appropriate format parts
and interchangeable cylinders from 20ml – 25l
Connected loads:
Electr. Connection: 400V; 50 Hz; with max. expansion stage approx. 4 kW
Pneumatic connection: R 1/4″; 6 bar
Advantages of an in-line piston
filling machine
1
2
3
1
Each machine is individually adapted to your product
2
Special customer requirements can be addressed during the entire design phase.
3
Available in any desired size.
